152n
Engine oil
Coolant
Viscosity ratings
Viscosity is the oil flow rating as estab-
lished in SAE classes.
Do not open the cooling system
when the engine is hot. Escaping
coolant can cause burns.<
The selection of the correct SAE class
depends on the climatic conditions in
the area where you typically drive your
BMW.
Coolant is comprised of water and
coolant additive. Not all commercially
available additives are suitable for your
BMW. Your BMW Sports Activity Vehi-
cle center knows which additives are
suitable.
Approved oils are in SAE classes
5W-40 and 5W-30.<
Use only suitable additives, other-
wise you could damage your
engine. The additives can be harmful
to your health.<
These oils may be used for driving in all
ambient temperatures.
Checking coolant level
1.
The engine must be at ambient tem-
perature
2.
Start by turning the cap of the expan-
sion tank counterclockwise. Pause to
allow any accumulated pressure to
escape, then open
The coolant level is correct when the
end of the red float is aligned with
the upper edge of the filler opening,
refer to the arrow in the illustration,
or max. 0.8 in/2 cm higher, i. e. up to
the mark on the float, refer also to the
schematic diagram, next to the cap
Always observe all applicable
environmental rules and regula-
tions when disposing of coolant addi-
tives.<
3.
Online Edition for Part No. 01 41 0 158 701 - �10/04 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals |
|---|---|
| Tags | BMW 3.0i, BMW 4.4i, BMW 4.8is, BMW E53, BMW X5 3.0i, BMW X5 Manuals |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2005 BMW X5 3.0i 4.4i 4.8is E53 Owners Manual 5.0 out of 5.0 based on 1 product reviews. How thi help me out a good thing