Maintenance and Specifications
5.
Remove the dipstick, wiping it clean with a clean, dry lint free rag. If
necessary, refer to Iden tifyin g compon en ts in the en gin e compa rtmen t
in this chapter for the location of the dipstick.
6.
7.
Install the dipstick making sure it is fully seated in the filler tube.
Remove the dipstick and inspect the fluid level. The fluid should be in
the designated areas for normal operating temperature.
Low fluid level
Do not drive the vehicle if the fluid
level is at the bottom of the dipstick
and the outside temperatures are
above 50°F (10°C).
Correct fluid level
The transmission fluid should be checked at normal operating
temperatures 150°F-170°F (66°C-77°C) on a level surface. The normal
operating temperature can be reached after approximately 20 miles
(
30 km) of driving.
The transmission fluid should be in
this range if at normal operating
temperature (150°F-170°F
[66°C-77°C])
.
High fluid level
Fluid levels above the safe range
may result in transaxle failure. An
overfill condition of transmission
fluid may cause shift and/or
engagement concerns and/or
possible damage.
High fluid levels can be caused by an overheating condition.
Adjusting automatic transmission fluid levels
Before adding any fluid, make sure the correct type is used. The type of
fluid used is normally indicated on the dipstick and also in the
Lubrica nt specifica tion s section in this chapter.
203
2005
Focus (foc)
Owners Guide (post-2002-fmt)
USA (fus)
Categories | Ford Focus Manuals, Ford Manuals |
---|---|
Model Year | 2005 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4) Automotive readers have rated 2005 Ford Focus Owners Manual 4.0 out of 4.0 based on 1 product reviews.