Possible displays
3.
Select "Service" and press the controller.
4.
If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Service requirements" is selected and
press the controller.
1
2
Oil level OK
Oil level is being checked.
This can take about 3 minutes if the car is at
a standstill on a level surface, or about
5
minutes while the car is on the move.
5.
If necessary, move the highlight marker to
the second field from the top. Turn the con-
troller until "Engine oil level" is selected and
press the controller. The oil level is dis-
played.
3
4
Oil level down to minimum:
Add engine oil as soon as possible, but no
more than 1 US quart/1 liter, refer also to
Adding engine oil on page 194.
Oil level is too high.
Possible messages
Too much oil will harm the engine.
Have the vehicle checked without
delay.<
>
>
"Engine oil level O.K."
"No measured value available: Updating
engine oil level measurement..."
5
The oil level sensor is defective.
The engine oil level is measured. This can
take about 3 minutes if the car is at a stand-
still on a level surface and the engine is run-
ning, and about 5 minutes while the car is on
the move.
Do not add engine oil. You can continue
your journey. Note the newly calculated dis-
tance remaining to the next oil service, refer
to page 196. Have the system checked as
soon as possible.
>
>
"Oil level at the minimum! Refill with 1 quart
of engine oil."
Add engine oil as soon as possible, but no
more than 1 US quart/1 liter, refer also to
Adding engine oil below.
Display via iDrive
iDrive, for operating principle refer to page 16.
1.
Press the
button.
This opens the start menu.
"Engine oil level too high"
2.
Press the controller to open the menu.
193
Online Edition for Part no. 01 41 0 012 346 - © 05/06 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 325Ci, BMW 330Ci, BMW E92 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)