Viewing stored Check Control
messages
until "Check Control messages" is selected
and press the controller.
1.
2.
Push button 1 in the turn indicator stalk up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the words "CHECK CONTROL".
5.
Select a text message and press the con-
troller.
Press button 2.
"CHECK OK" appears if there are no Check
Control messages.
If a Check Control message has been
stored, the corresponding lamp comes on.
It is accompanied by a text message on the
Control Display.
3.
4.
Push button 1 to check for other messages.
To exit the display:
Press button 2.
The display again shows the outside tem-
perature and the time.
Select
and press the controller.
Speed limit
Viewing more information later
You can enter a speed, and a Check Control
message will indicate when you reach this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph or 5 km/h.
iDrive, for operating principle refer to page 16.
1.
Press the
button.
This opens the start menu.
2.
3.
4.
Press the controller to open the menu.
Select "Service" and press the controller.
If necessary, move the highlight marker to
the uppermost field. Turn the controller
iDrive, for operating principle refer to page 16.
1.
2.
3.
Open the start menu.
Call up "Navigation".
Select "Car Data" and press the controller.
77
Online Edition for Part no. 01 41 0 012 346 - © 05/06 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 325Ci, BMW 330Ci, BMW E92 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)