High beams, parking lamps
Front turn signal, sidemarker
Your BMW is equipped with two turn signal
lamps per side in the front.
Turn signal lamp 1
Bulb 21 watts, WY 21 SV
The illustration shows the front right side of the
engine compartment.
1.
Press the lever shown:
>
>
downward for the right turn signal
upward for the left turn signal
The illustration shows the front left side of the
engine compartment.
High beams
Bulb 55 watts, H 7
1.
Remove the cover cap 1 by pressing the tab
and removing the cover cap upward.
2.
Press the bulb holder from above to release
it.
3.
4.
Remove the bulb holder.
Remove and replace the bulb.
2.
3.
Remove the bulb holder towards the rear.
Remove and replace the bulb.
The lamp H7 is pressurized; wear eye
protection and protective gloves. Other-
wise, there is the risk of bodily injury if the lamp
is damaged.<
Turn signal lamp 2
Bulb 21 watts, WY 21 SV
Parking lamps
The bulb for the turn signal lamp 2 can be
replaced via the wheel well.
Bulb 10 watts
The illustration shows the front left side of the
vehicle.
Bulb holder and reflector are one unit and
are replaced together.<
1.
Turn the steering all the way to be able to
remove the cover, refer to illustration.
1.
2.
Turn the bulb holder 2 to the right and
remove.
2.
Turn off the light, switch off the ignition and
remove the remote control from the ignition
lock.
Press the snap connection on the plug con-
nector, pull off the bulb holder and replace.
3.
Unscrew the two bolts using the open-end
wrench from the onboard tool kit, refer to
page 197.
198
Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)