Indicator lamp displays
even if the convertible top is open. Falling
objects, e.g. leaves, can trigger false alarms,
refer to Avoiding unintentional alarms.
Avoiding unintentional alarms
The tilt alarm sensor and interior motion sensor
may be switched off at the same time. This pre-
vents unintentional alarms, e.g. in the following
situations:
>
In stacking garages
>
>
The indicator lamp below the interior rear- >
When transporting on car-carrying trains
When animals are to remain in the vehicle
view mirror flashes continuously: the sys-
tem is armed.
>
The indicator lamp flashes after locking: the
doors or luggage compartment lid are not
properly closed. Even if you do not close the
alerted area, the system begins to monitor
the remaining areas, and the indicator lamp
flashes continuously after approx. 10 sec-
onds. However, the interior motion sensor
is not activated.
Switching off the tilt alarm sensor and
interior motion sensor
Press the
once again immediately after locking.
button on the remote control
The indicator lamp lights up briefly and then
flashes continuously. The tilt alarm sensor and
the interior motion sensor are switched off until
the vehicle is unlocked and locked again.
>
>
After the vehicle is unlocked, the indicator
lamp goes out: no manipulation or
attempted intrusions have been detected in
the period since the system was armed.
Comfort access*
Comfort access enables you to access your
vehicle without having to hold the remote con-
trol in your hand. It is sufficient to carry the
remote control with you, e.g. in your jacket
pocket. The vehicle automatically detects the
related remote control in the immediate vicinity
or in the interior.
The indicator lamp flashes after unlocking
until the remote control is inserted into the
ignition lock, however for a maximum of
approx. 5 minutes: an attempted entry has
been detected in the period since the sys-
tem was armed.
Tilt alarm sensor
Comfort access supports the following func-
tions:
Monitors the inclination of the vehicle. The
alarm system reacts, for example, if someone >
Unlocking/locking vehicle
attempts to steal the wheels or tow the vehicle.
>
>
Starting engine
Comfort locking
Interior motion sensor
Coupe:
Functional requirement
In order for the interior motion sensor to func-
tion properly, the windows and glass sunroof*
must be completely closed.
>
The vehicle can only be unlocked if the
vehicle detects that the remote control car-
ried is located outside the vehicle.
Convertible:
>
The next unlocking and locking cycle is not
possible until after approx. 2 seconds.
Monitors the interior up to the height of the seat
cushions. This means that the alarm system,
including the interior motion sensor, is armed
36
Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)