7.
Insert the Allen wrench into the opening
provided.
Before installing
1.
Remove the wind deflector from the protec-
tive sleeve and fold it open, refer to
arrows 1.
8.
9.
From the outside, both persons pull the
front frame of the convertible top down-
ward, as simultaneously as possible on the
two sides.
2.
3.
Press the upper and lower section together
until the locking device engages, refer to
arrow 2.
Turn the Allen wrench in the direction of the
arrow until the front convertible top frame is
locked to the windshield frame.
Push the securing pin 3 out until it engages.
The rear convertible top ends are pressed
automatically onto the convertible top com-
partment lid and close tightly with tension.
10.
If necessary, close the rear window again
manually in the same way as above.
Wind deflector*
The wind deflector keeps the air movement in
the passenger compartment to a minimum
when the convertible top is open, thus enabling
pleasant driving even at higher speeds.
4.
Unfold the rear mounts 4.
Installing
The wind deflector is stowed in a protective
sleeve in the luggage compartment. Short
instructions for use are also provided on the
protective sleeve.
1.
Insert the securing pin 1 of the wind deflec-
tor into the appropriate opening on the right
side of the vehicle.
2.
Guide the rear mounts 2 into the recepta-
cles provided.
45
Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG
Product Specification
Categories | BMW 6-Series Manuals, BMW Manuals |
---|---|
Tags | BMW 650i, BMW E63, BMW E64 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |