Practical interior accessories
Integrated universal remote
control*
HomeLink is a registered trademark of
Johnson Controls, Inc.<
Programming
The concept
The integrated universal remote control
replaces up to three different hand-held trans-
mitters for various items of radio-controlled
equipment such as door openers and house
alarm systems. The integrated universal remote
control recognizes and learns the transmitted
signal of each of the original hand-held trans-
mitters.
The signal of an original hand-held transmitter
can be programmed on one of the three mem-
ory buttons 1. Once this is done, each of the
devices can be actuated with the appropriately
programmed memory button 1. The LED 2 indi-
cates transmission of the signal.
1
2
Memory buttons
LED
Fixed-code hand-held transmitters
1.
2.
Turn the ignition key to position 2.
Should you sell your vehicle one day, be sure to
delete the stored programs beforehand for your
security, refer to page 66.
For initial use:
Press both outer buttons 1 for approx.
20
seconds, maintaining pressure until the
To prevent possible damage or injury,
before programming or using the inte-
grated universal remote control, always inspect
the immediate area to make certain that no peo-
ple, animals or objects are within the travel
range of the device. Also, comply with the
safety precautions of the original hand-held
transmitter.<
LED 2 starts to flash. All stored programs
are deleted.
3.
4.
Hold the original hand-held transmitter at a
distance of approx. 2 in/5 cm to 8 in/20 cm
from the memory buttons 1.
The required distance between the
hand-held transmitter and memory
buttons 1 depends on the relevant system
of the original hand-held transmitter used.<
Checking compatibility
Simultaneously press the transmit button
on the original hand-held transmitter and
the desired memory button 1 of the inte-
grated universal remote control. Initially, the
LED 2 flashes slowly. Release both buttons
as soon as the LED 2 flashes rapidly. If the
LED 2 does not flash rapidly after approx.
If you see this symbol on the packaging
or in the manual supplied with the origi-
nal hand-held transmitter, then it is safe
to assume that the radio-controlled device is
compatible with the integrated universal
remote control.
If you have additional questions, please
ask at your BMW Sports Activity Vehicle
Center or call: 1-800-355-3515.
You can find also information on the Internet at:
www.bmwusa.com or
15
seconds, then change the distance.
5.
To program other original hand-held trans-
mitters, repeat steps 3 and 4.
www.homelink.com.
65
Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG
| Categories | BMW Manuals, BMW X3 Manuals |
|---|---|
| Tags | BMW E83, BMW X3 2.5i, BMW X3 3.0i, BMW X3 Manuals |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4.5 out of 5)
Automotive readers have rated 2006 BMW X3 2.5i 3.0i E83 Owners Manual 4.5 out of 5.0 based on 2 product reviews. I was after a 2007 manual but a 2006 manual is fine. great stuff
Excellent reference. Thank you