Lights
5.
Carefully pull bulb straight out of
the socket and push in the new
bulb.
6.
Install the bulb socket into the
lamp assembly by rotating it
clockwise.
7.
Carefully position the headlamp
assembly onto the vehicle.
8.
Hold the headlamp assembly snugly against the vehicle and install the
retainer pins straight down to lock the lamp into place.
9.
Before reinstalling the bolt, make sure the retainer pins are fully
seated, and install bolt on headlamp housing.
10.
headlamp was correctly aligned before you changed the bulb, you should
not need to align it again.
Turn the headlamps on and make sure they work properly. If the
Replacinghigh-mountbrakelampassembly
To change the high-mount brake
lamp assembly:
1.
Pry the light assembly away from
its housing and push rearward to
disengage it from the retaining clips.
2.
Lift the front of the light
assembly from the parcel shelf.
3.
Disconnect the light assembly
wiring and replace the light
assembly.
4.
To complete installation, follow the removal procedure in reverse
order.
Replacinghigh-mountbrakelampbulbs—Decklidspoiler
Your vehicle may be equipped with a decklid spoiler that has a high
mount stop lamp module containing integral multiple light emitting
diodes (LED). If one or more LEDs burn out, the complete lamp module
has to be replaced. See your dealer for the replacement LED module.
38
2006
Taurus(tau)
OwnersGuide(post-2002-fmt)
USA(fus)
| Categories | Ford Manuals, Ford Taurus Manuals |
|---|---|
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Automotive readers have rated 2006 Ford Taurus Owners Manual 5.0 out of 5.0 based on 2 product reviews. Thank God I found you. Helped me out of a bad spot. Thank you, thank you . Thank you.
Excelent help. Thanks.