Driver Controls
Most geographic areas (zones) have a magnetic north compass point that
varies slightly from the northerly direction on maps. This variation is four
degrees between adjacent zones and will become noticeable as the
vehicle crosses multiple zones. A correct zone setting will eliminate this
error. Refer toCompasszone/calibrationadjustment.
Compasszone/calibrationadjustment
Perform this adjustment in an open area free from steel structures and
high voltage lines.
For optimum calibration, turn off all electrical accessories (heater/air
conditioning, wipers, etc.) and make sure all vehicle doors are shut.
1.
2.
3.
Turn ignition to the ON position.
Start the engine.
Press and hold the INFO button for 2 seconds to select the
Compass/Odometer function. (Do not select Trip, DTE, or AFE.Thetop
ofthemessagecentermustbeblank).
Note: If the compass displaysЉCAL 000000.0 miЉ instead of heading
information, the compass will need to be calibrated. Slowly drive the
vehicle in a circle (less than 3 mph [5 km/h]) until theЉCALЉ indicator
changes to display compass heading. This may take up to 3 circles to
complete calibration.
4.
Determine your magnetic zone by
referring to the zone map.
3
4
2
1
15
14
13
5
12
6
7 8 91011
5.
the message center display changes
to show the current zone setting.
Press and hold the RESET until
56
2006
Taurus(tau)
OwnersGuide(post-2002-fmt)
USA(fus)
| Categories | Ford Manuals, Ford Taurus Manuals |
|---|---|
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Automotive readers have rated 2006 Ford Taurus Owners Manual 5.0 out of 5.0 based on 2 product reviews. Thank God I found you. Helped me out of a bad spot. Thank you, thank you . Thank you.
Excelent help. Thanks.