WHATTODOINANEMERGENCY3
3
JUMP STARTING
D020A03A-AAT
o
If you should accidentally get acid on your
skin or in your eyes, immediately remove
anycontaminatedclothingandflushthearea
with clear water for at least 15 minutes. Then
promptly obtain medical attention. If you
must be transported to an emergency facil-
ity, continue to apply water to the affected
area with a sponge or cloth.
Then attach the other end of the same cable
tothepositive(+) postorcableofthebooster
battery. Next, using the other cable, attach
one clamp to the negative (-) post or cable
of the booster battery. Then attach the other
end of that cable to a solid metal part of the
engine of the vehicle with the discharged
battery away from the battery. Do not con-
nect the cable to any moving part.
4. Start the engine in the car with the booster
battery and let it run for a few minutes. This
will help to assure that the booster battery is
fully charged. During the jumping operation,
run the engine in this vehicle at about 2,000
rpm.
5. Start the engine in the car with the dis-
charged battery using the normal starting
procedure. After the engine starts, leave the
jumper cables connected and let the engine
run at fast idle or about 2,000 rpm for several
minutes.
Discharged
battery
o
o
o
The gas produced by the battery during the
jump-start operation is highly explosive. Do
not smoke or allow a spark or an open flame
in
the vicinity.
The battery being used to provide the jump
start must be 12-volt. If you cannot deter-
minethatitisa12-voltbattery,donot attempt
to use it for the jump start.
To jump start a car with a discharged battery,
follow this procedure exactly:
Booster
battery
D020A01O
!
WARNING:
The gas produced by the battery during the
jump-start operation is highly explosive. If
these instructions are not followed exactly,
serious personal injury and damage to the
vehicle may occur! If you are not sure how
to follow this procedure, seek qualified
assistance. Automobile batteries contain
sulfuric acid. This is poisonous and highly
corrosive. When jump starting, wear pro-
tective glasses and be careful not to get
acid on yourself, your clothing or on the car.
1. If the booster battery is installed in another
vehicle, be sure the two vehicles are not
touching.
2. Turn off all unnecessary lights and acces-
sories in both vehicles.
3. Attach the clamps of the jumper cable in the
exactlocationshownontheillustration.First,
attach one clamp of the jumper cable to the
positive (+) post or cable of the discharged
battery.
6. Carefully remove the jumper cables in the
reverse order of attachment.
If you do not know why your battery became
discharged (because the lights were left on,
etc.), have the charging system checked by
your Hyundai dealer.
| Categories | Hyundai Manuals, Hyundai Santa Fe Manuals |
|---|---|
| Tags | Hyundai Santa Fe 2.7, Hyundai Santa Fe 3.5 |
| Model Year | 2006 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Santa Fe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.33 out of 5)
Automotive readers have rated 2006 Hyundai Santa Fe Owners Manual 4.3 out of 5.0 based on 3 product reviews. yes to u
Comments are closed.