DO-IT-YOURSELFMAINTENANCE 6
25
6
7
. Draw a vertical line (through the center of
each headlight beam pattern) and a horizon-
tal line (through the center of each headlight
beam pattern) on the aiming screen.
And then, draw a parallel line at 0.8 in. (21
mm) under the horizontal line.
. Adjusteachcut-offlineofthelowbeamtothe
parallel line with a phillips screwdriver -
VERTICAL AIMING.
G290B01O-AAT
Adjustment After Headlight Assembly
Replacement
SPECIFICATION:
"H";
Horizontal center line of headlights from
ground: 2WD : 32.5 in.(822 mm)
4WD : 33.3 in.(843 mm)
"W";
Distance between each headlight center:
46.5 in.(1,178 mm)
Vertical line
Horizontal line
W
"P"
H
"L";
!
Horizontal aiming should be adjusted by
an authorized Hyundai dealer.
Cut-off line
Distance between the headlights and the
wall that the lights are tested against:
118 in. (3,000 mm).
WARNING:
L
Ground line
H
G290A03O
If the vehicle has had front body repair and the
headlight assembly has been replaced, the
headlight aiming should be checked using an
aiming chart as shown in the illustration. Turn on
the headlight switch. (Low Beam Position)
1.
Adjust headlights so that main axis of light is
parallel to center line of the body and is
alignedwithpoint"P"shownintheillustration.
Dottedlinesintheillustrationshowthecenter
of headlights.
2.
| Categories | Hyundai Manuals, Hyundai Santa Fe Manuals |
|---|---|
| Tags | Hyundai Santa Fe 2.7, Hyundai Santa Fe 3.5 |
| Model Year | 2006 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Santa Fe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.33 out of 5)
Automotive readers have rated 2006 Hyundai Santa Fe Owners Manual 4.3 out of 5.0 based on 3 product reviews. yes to u
Comments are closed.