Practical hints
Flat tire
୴
୴̈ Keeping jack in this position, turn
crank 3 clockwise until the jack base
meets the ground. Make sure the jack
is vertical (plumb line).
Removing the wheel
Mounting the new wheel
̈
Clean contact surfaces of wheel and
wheel hub.
!
̈
Continue to turn the crank until the tire
is a maximum of 1.2 in (3 cm) from the
ground.
To avoid paint damage, place wheel flat
against hub and hold it there while in-
stalling first wheel bolt.
Warning!
G
Warning!
G
The jack is intended only for lifting the vehi-
cle briefly for wheel changes. It is not suited
for performing maintenance work under the
vehicle.
1
Alignment bolt
Always replace wheel bolts that are dam-
aged or rusted.
̈
Unscrew upper-most wheel bolt and re-
move.
Never apply oil or grease to wheel bolts.
̈
Replace this wheel bolt with alignment
bolt 1 supplied in the tool kit.
ț
Never start the engine when the vehicle
is raised.
Damaged wheel hub threads should be re-
paired immediately. Do not continue to drive
under these circumstances! Contact an au-
thorized Mercedes-Benz Center or call
Roadside Assistance.
ț
Never lie down under the raised vehicle.
̈ Remove the remaining bolts.
!
Do not place wheel bolts in sand or dirt.
This could result in damage to the bolt
and wheel hub threads.
Incorrect wheel bolts or improperly tight-
ened wheel bolts can cause the wheel to
come off. This could cause an accident.
Make sure you are using the correct wheel
bolts.
̈
Remove the wheel.
406
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Tags | Mercedes-Benz 4MATIC, Mercedes-Benz S350, Mercedes-Benz S430, Mercedes-Benz S500, Mercedes-Benz S55 AMG, Mercedes-Benz S600, Mercedes-Benz S65 AMG |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
need mercedes 2006 operating manual