Controls in detail
Useful features
୴
୴Step 9:
i
Gate operator/Canadian programming
Some garage door openers (or other
rolling code equipped devices) may
require you to press, hold for 2 seconds
and release the same signal transmit-
ter button a third time to complete the
training process.
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the
integrated signal transmitter to pick up the
signal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
̈
Press the “training” button on the ga-
rage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing two steps.
Step 10:
Step 12:
̈
Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
̈
Confirm the garage door operation by
pressing the programmed signal trans-
mitter button (2, 3 or 4).
If you live in Canada or if you are having
difficulties programming a gate operator
(regardless of where you live) by using the
programming procedures, replace step 4
with the following:
(
2, 3 or 4).
Step 13:
Step 11:
Press, hold for 2 seconds and release
̈
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
̈
same signal transmitter button a sec-
ond time to complete the training pro-
cess.
Step 4:
̈
Press and hold the signal transmitter
button (2, 3 or 4). Do not release
this button until it has been successful-
ly trained.
250
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz SL-Class Manuals |
---|---|
Tags | Mercedes-Benz SL, Mercedes-Benz SL500, Mercedes-Benz SL55 AMG, Mercedes-Benz SL600, Mercedes-Benz SL65 AMG |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Thanx for this information. Having problems with insurance and warrantee