Practical hints
Jump starting
̄
Jump starting
If the starter battery is discharged, the en-
gine can be started with jumper cables and
the battery of another vehicle. Observe the
following:
G
!
Warning!
Jump starting may only be performed
on the battery installed in the engine
compartment.
Failure to follow these directions will cause
damage to the electronic components, and
can lead to a battery explosion and severe
injury or death.
ț
Jump starting should only be performed
when the engine and catalytic convert-
er are cold.
Avoid repeated and lengthy starting at-
tempts.
Never lean over batteries while connecting
or jump starting, you might get injured.
Do not attempt to start the engine us-
ing a battery quick charge unit.
ț
ț
Do not start the engine if the battery is
frozen. Let the battery thaw out first.
Battery fluid contains sulfuric acid. Do not
allow this fluid to come in contact with eyes,
skin or clothing. In case it does, immediately
flush affected area with water, and seek
medical help if necessary.
If the engine does not run after several
unsuccessful starting attempts, have it
checked at the nearest authorized
Mercedes-Benz Center.
Only jump start from batteries with the
same voltage rating (12V). Jump start-
ing with a more powerful battery could
damage the vehicle’s electrical system,
which will not be covered by the
Excessive unburned fuel generated by
repeated failed starting attempts may
damage the catalytic converter and
may present a fire risk.
A battery will also produce hydrogen gas,
which is flammable and very explosive. Keep
flames or sparks away from battery, avoid
improper connection of jumper cables,
smoking, etc.
Mercedes-Benz Limited Warranty.
ț
ț
Only use jumper cables with sufficient
cross section and insulated terminal
clamps.
Make sure the jumper cables do not
have loose or missing insulation.
Attempting to jump start a frozen battery
can result in it exploding, causing personal
injury.
Always make sure the jumper cables
are not on or near pulleys, fans, or oth-
er parts that move when an engine is
started or running.
Make sure the cable clamps do not
touch any other metal part while the
other end is still attached to a battery.
Read all instructions before proceeding.
419
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz SL-Class Manuals |
---|---|
Tags | Mercedes-Benz SL, Mercedes-Benz SL500, Mercedes-Benz SL55 AMG, Mercedes-Benz SL600, Mercedes-Benz SL65 AMG |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Thanx for this information. Having problems with insurance and warrantee