In case of an emergency
2GHN409B
1GHA4103
1GHA4104
8.
Loosen the wheel lug nuts coun- 9. Place the jack at the front or rear 10. Insert the jack handle into the
terclockwise one turn each, but do jacking position closest to the tire jack and turn it clockwise, raising
not remove any nut until the tire you are changing. Place the jack the vehicle until the tire just
has been raised off the ground. at the designated locations under clears the ground. This measure-
the frame. The jacking positions ment is approximately 30 mm
are plates welded to the frame (1.2 in). Before removing the
with two tabs and a raised dot to wheel lug nuts, make sure the
index with the jack. vehicle is stable and that there is
no chance for movement or slip-
page.
WARNING - Jack location
To reduce the possibility of
injury, be sure to use only the
jack provided with the vehicle
and in the correct jack position;
never use any other part of the
vehicle for jack support.
11.
Remove the wheel lug nuts by
turning them counterclockwise,
then remove the wheel.
12. Mount the spare tire into position
and install the wheel lug nuts
with the beveled edge inward.
6
21
| Categories | Kia Amanti Manuals, Kia Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)