Maintenance
AUTOMATIC TRANSAXLE
2.
After the transaxle is warmed up suffi-
ciently (fluid temperature 70~80°C
(158~176°F),
for example by 10 min-
utes usual driving, shift the selector
lever through all positions then place
the selector lever in “N (Neutral) or P
(Park)” position.
OGH056001
OVQ056002
Checking the automatic transaxle
fluid level
3. Confirm that the fluid level is in “HOT”
range on the level gauge. If the fluid
level is lower, add the specified fluid
from the fill hole. If the fluid level is
higher, drain the fluid from the drain
hole.
The
automatic transaxle fluid level
should be checked regularly.
Keep the vehicle on the level ground with
the parking brake applied and check the
fluid level according to the following pro-
cedure.
4.
If the fluid level is checked in cold con-
dition (fluid temperature 20~30°C
(68~86°F)
add the fluid to “COLD” line
1.
Place the selector lever in N (Neutral)
position and confirm the engine is run-
ning at normal idle speed.
and then recheck the fluid level
according to the above step 2.
7
16
| Categories | Kia Amanti Manuals, Kia Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)