Turning lamps*
Side-mounted turn signals
H3 bulb, 55 watts
5-watt bulb, W5W
1.
Remove the sealing cap, refer to Access to
lamps.
1.
Press back against the front edge of the
lamp with the tip of your finger, then pivot it
out.
2.
Push the locking bar to the side out of the
anchor and fold upward.
2.
3.
Turn the bulb holder to the left and remove.
Remove the bulb for replacement.
3.
Remove the connector and take out the
bulb.
Side marker lamps, front and rear
4.
5.
6.
7.
Replace the bulb and reinstall.
Fold down the locking bar and engage it.
Reconnect the connector.
To replace, please go to your BMW center or a
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel.
Mount the sealing cap. Watch the markings
on the bulb when doing so.
Tail lamps
Sedan
Turn signals, front
21-watt bulb, PY21W
1.
Turn the bulb holder to the left and remove. > Turn signals 1, tail lamps 6 and side marker
lamps 7 are designed using LED technol-
ogy. In the event of a malfunction, please go
to your BMW center or a workshop that
works according to BMW repair procedures
with correspondingly trained personnel.
>
>
Backup lamps: 16-watt bulb, W16W
Other lamps: 21-watt bulb, P21W
2.
Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
246
Online Edition for Part no. 01 41 2 600 310 - © 02/08 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 525i, BMW 525xi, BMW 530i, BMW 530xi, BMW 550i, BMW E61 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)