Adaptive brake assistant*
To increase vehicle stability, activate DSC again
as soon as possible.
In conjunction with the active cruise control
with the stop-and-go function, the adaptive
brake assistant ensures that the brake
responds even more quickly during braking
with the brake assistant.
Activating DSC
Press the button; the indicator lamp in the
instrument cluster goes out.
DSC Dynamic Stability Control
For better control
DSC prevents traction loss in the driving wheels
when starting off and accelerating. The system
also identifies unstable driving conditions, such
as a loss of traction at the rear of the vehicle or
sliding of the vehicle in its front wheels. In these
cases, DSC helps the vehicle maintain a safe
course within physical limits by reducing engine
output and through braking actions in the indi-
vidual wheels.
The indicator lamp flashes:
DSC controls the drive forces and
brake forces.
The indicator lamp lights up:
DSC is deactivated.
DTC Dynamic Traction Control
DTC is a version of DSC in which the drive out-
put is optimized for particular road conditions,
e.g. unplowed snow-covered roads. The sys-
tem assures the maximal drive output, but with
reduced driving stability. It is therefore neces-
sary to drive with appropriate caution.
The laws of physics cannot be repealed,
even with DSC. An appropriate driving
style always remains the responsibility of the
driver. Therefore, do not restrict the additional
safety margin with a risky driving style, as other-
wise there is a risk of an accident.<
You may find it useful to briefly activate DTC
under the following special circumstances:
>
>
>
When driving on snowy inclines, in slush, or
on unplowed, snow-covered road surfaces
Deactivating DSC
When rocking a stuck vehicle free or start-
ing off in deep snow or on loose ground
When driving with snow chains*
Activating DTC
Press the button until the DSC indicator lamp in
the instrument cluster lights up, but not longer
than approx. 10 seconds. DTC Dynamic Trac-
tion Control and DSC are deactivated together.
Stabilizing and drive output promoting actions
are no longer executed. In addition, the stability
promoting intervention of the active steering*
is deactivated, refer to page 98.
Press the button briefly; the DTC indicator lamp
in the instrument cluster lights up.
A message appears on the Control Display.
Please note any supplementary information
that appears there.
91
Online Edition for Part no. 01 41 2 600 310 - © 02/08 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 525i, BMW 525xi, BMW 530i, BMW 530xi, BMW 550i, BMW E61 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)