Please make sure that all electronic sys- >
tems/consumers are switched off before
locking to save the battery.<
Remote control in ignition lock:
If transmission position N is engaged, the
transmission remains in this position after
the engine is switched off.
Comfort closing
Before driving into a car wash
Hold a finger or the back of a hand on the sur-
face, arrow 2.
The vehicle can roll if you proceed according to
the following steps:
The windows and the panorama glass sunroof*
are closed.
1.
Insert remote control into ignition lock.
Depress brake pedal.
Watch during the closing process to be
2.
3.
4.
5.
6.
sure that no one is injured. Removing the
hand from the door handle immediately stops
the closing process.<
Engage transmission position N.
Release the parking brake.
Switch off the engine.
Opening liftgate
Leave the remote control in the ignition
lock.
Press the button on the liftgate.
This corresponds to pressing the
button.
Malfunction
If a remote control accidentally left in the
cargo bay is detected in the locked vehi-
cle after closing the liftgate, the liftgate opens
again. The hazard warning flashers flash and a
signal* sounds.<
The comfort access function may malfunction
due to local radio waves. Then open or close the
vehicle with the buttons on the remote control
or with a key. To start the engine following this,
insert the remote control in the ignition lock.
Switching on radio readiness
The warning lamp in the instrument
panel lights up when an attempt is
made to start the engine: starting the
By briefly pressing the Start/Stop button, you
switch on the radio readiness, refer to page 59.
engine is not possible. The remote control is
not in the vehicle or has a malfunction. Take
along the remote control into the vehicle or
have it checked. Insert another remote control
into the ignition lock if necessary.
When doing so, do not depress the brake
pedal, otherwise the engine will start.<
Starting engine
You can start the engine or switch on the igni-
tion if a remote control is located in the interior
of the vehicle. It need not be inserted in the igni-
tion lock, refer to page 59.
The warning lamp in the instrument
panel lights up when the engine is
running: the remote control is no
longer in the vehicle. After switching off the
engine, the engine can only be started again
within approx. 10 seconds if no door has been
opened.
As long as no remote control is detected in the
vehicle, it is only possible to restart the engine
within approx. 10 seconds after it is switched off
if no door has been opened.
The indicator lamp in the instrument
panel lights up and a message
appears on the Control Display:
Switching off engine
>
Remote control not in ignition lock:
After switching off the engine, the transmis-
sion is automatically switched into trans-
mission position P.
Replace the battery of the remote control.
37
Online Edition for Part no. 01 41 0 014 248 - © 08/07 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals |
|---|---|
| Tags | BMW 3.0si, BMW 4.8is, BMW E70, BMW X5 3.0si |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2008 BMW X5 3.0si 4.8is E70 Owners Manual 4.0 out of 4.0 based on 1 product reviews. Bbw x5 manual need to know how to work my gadgets in car