Releasing
Locking
1.
Slide back the cover of the cup holder and
remove the floor mat on the bar between
the cup holders, arrow 1.
1.
Pull out the releasing tool.
The transmission lock is engaged again.
2.
3.
If necessary, insert the lock* and lock it.
2.
3.
4.
Open the cover in the bottom of the cup
holder with the releasing tool from the
onboard tool kit, page 247, refer to arrow 2.
Close the cover in the bottom of the cup
holder and lay in the mat again.
4.
Close the cover of the cup holder and stow
the releasing tool.
If necessary, unlock the lock* with the inte-
grated key of the remote control, refer to
page 28, and remove it.
Information on jump starting and towing, from
page 256.
Insert the releasing tool into the opening,
arrow 3.
Turn signals/headlamp
flasher/high beams
5.
Turn the releasing tool as far as possible,
arrow 4, and then press downward and
leave it in. The transmission lock is
released.
1
2
3
High beams
Headlamp flasher
Turn signals
Engage the transmission lock after park-
ing the vehicle at its destination. Other-
wise there is a danger of the vehicle rolling.<
Using turn signals
Press the lever beyond the resistance point.
To switch off manually, press the lever up to the
resistance point.
Atypically rapid flashing of the indicator
lamp indicates that a turn signal bulb
needs to be replaced.<
66
Online Edition for Part no. 01 41 0 014 248 - © 08/07 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals |
|---|---|
| Tags | BMW 3.0si, BMW 4.8is, BMW E70, BMW X5 3.0si |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2008 BMW X5 3.0si 4.8is E70 Owners Manual 4.0 out of 4.0 based on 1 product reviews. Bbw x5 manual need to know how to work my gadgets in car