Features of your vehicle
1.
POWER ON-OFF Control Knob
4. EQ Button
Then, by simply pressing the AM/FM
band select button and/or one of the six
station select buttons, you may recall any
of these stations instantly.To program the
stations, follow these steps:
•
The radio unit may be operated when
the ignition key is in the "ACC" or "ON"
position. Press the button to switch the
power on. The LCD shows the radio
frequency in the radio mode, CD/ MP3
track in the CD/MP3 mode. To switch
the power off, press the button again.
Push the FM/AM or CD/MP3 to turn on
that function without pushing Power
ON-OFF control knob.
Press the EQ button to select the CLAS-
SIC, POP, ROCK, JAZZ and OFF MODE
for the desired tone quality. Each press of
the button changes the display as fol-
lows;
•
•
•
Press AM/FM selector to set the band
for AM, FM1 and FM2.
Select the desired station to be stored
by seek or manual tuning.
Determine the preset station select
button you wish to use to access that
station.
CLASSIC➟POP➟ROCK➟JAZZ➟OFF
•
5. AUTO SEEK Select Button
(Automatic Channel Selection)
Press the AUTO SEEK select button.
When the
will automatically tune to the next higher
frequency and when the side is
pressed, it will automatically tune to the
next lower frequency.
VOLUME Control
•
Press and hold the station select but-
ton for more than 0.8 seconds. A select
button indicator will show in the display
indicating which select button you have
depressed. The frequency display will
flash after it has been stored in to the
memory. You should then release the
button, and proceed to program the
next desired station. A total of 18 sta-
tions can be programmed by selecting
one AM and two FM station per button.
Rotate the knob clockwise to increase
the volume and turn the knob counter-
clockwise to reduce the volume.
side is pressed, the unit
2.
BAND Select Button
Pressing the FM/AM button changes the
AM, FM1 and FM2 bands. The mode 6. PRESET STATION Select
selected is shown on the display.
Buttons
Six stations for AM, FM1 and FM2
respectively can be preset in the elec-
tronic memory circuit.
3.
RADIO SCAN Button
•
When completed, any preset station
may be recalled by selecting AM, FM1
or FM2 band and the appropriate sta-
tion button.
When you press the button, frequency is
changed and the next channel is
received automatically.
HOW TO PRESET STATIONS
To stay on a station, press the CD SCAN
button again.
Six AM and twelve FM stations may be
programmed into the memory of the
radio.
3
189
| Categories | Kia Manuals, Kia Sedona Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.33 out of 5)
Automotive readers have rated 2008 Kia Sedona Owners Manual 4.3 out of 5.0 based on 3 product reviews. Only had it a couple weeks, so far no problem, I like it very much.