Maintenance
Remove the valve cap from the tire Tire rotation
With a full-size spare tire (if equipped)
valve stem. Press the tire gage firm-
To equalize tread wear, it is recom-
ly onto the valve to get a pressure
measurement. If the cold tire inflation
pressure matches the recommended
pressure on the tire and loading
information label, no further adjust-
ment is necessary. If the pressure is
mended that the tires be rotated
every 12,000 km (7,500 miles) or
sooner if irregular wear develops.
During rotation, check the tires for
correct balance.
low, add air until you reach the rec- When rotating tires, check for uneven
S2BLA790
ommended amount.
wear and damage. Abnormal wear is
usually caused by incorrect tire pres-
sure, improper wheel alignment, out-
of-balance wheels, severe braking or
severe cornering. Look for bumps or
bulges in the tread or side of tire.
Replace the tire if you find either of
these conditions. Replace the tire if
fabric or cord is visible. After rotation,
be sure to bring the front and rear tire
pressures to specification and check
lug nut tightness.
Without a spare tire
If you overfill the tire, release air by
pushing on the metal stem in the
center of the tire valve. Recheck the
tire pressure with the tire gage. Be
sure to put the valve caps back on
the valve stems. They help prevent
leaks by keeping out dirt and mois-
ture.
S2BLA790A
Directional tires (if equipped)
Refer to Section 7, Specifications.
CBGQ0707A
6
33
Categories | Kia Manuals, Kia Sedona Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(3 votes, average: 4.33 out of 5) Automotive readers have rated 2008 Kia Sedona Owners Manual 4.3 out of 5.0 based on 3 product reviews.
Only had it a couple weeks, so far no problem, I like it very much.