Maintenance
AIR CLEANER
AUTOMATIC TRANSAXLE
HOT
COLD
OVQ066005N
OVQ066011N
OVQ056002
Element replacement
Checking the automatic transaxle
fluid level
The automatic transaxle fluid level
should be checked regularly.
Keep the vehicle on the level ground with
the parking brake applied and check the
fluid level according to the following pro-
cedure.
1. Place the selector lever in N (Neutral)
position and confirm the engine is run-
ning at normal idle speed.
3. Confirm that the fluid level is in “HOT”
range on the level gauge. If the fluid
level is lower, add the specified fluid
from the fill hole. If the fluid level is
higher, drain the fluid from the drain
hole.
Have the air cleaner element checked
and replaced in accordance with the
maintenance schedule.
CAUTION - Engine
Do not drive with the air cleaner
removed; this will result in exces-
sive engine wear.
4.
If the fluid level is checked in cold con-
dition (fluid temperature 20~30°C
(68~86°F) add the fluid to “COLD”
line
and then recheck the fluid level
according to the above step 2.
2.
After the transaxle is warmed up suffi-
ciently (fluid temperature 70~80°C
(158~176°F)), for example by 10 min-
utes usual driving, shift the selector
lever through all positions then place
the selector lever in N (Neutral) or P
(Park) position.
WARNING - Engine
Driving without an air cleaner
encourages backfiring, which could
cause a fire in the engine compart-
ment.
6
13
| Categories | Kia Manuals, Kia Sedona Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.33 out of 5)
Automotive readers have rated 2008 Kia Sedona Owners Manual 4.3 out of 5.0 based on 3 product reviews. Only had it a couple weeks, so far no problem, I like it very much.