Sports Wagon: self-leveling
suspension
System limits
The Flat Tire Monitor cannot indicate sudden
severe tire damage caused by outside factors
and does not detect a natural, even pressure
drop in all four tires.
Malfunction
The warning lamp for self-leveling sus-
pension lights up yellow and a message
is shown on the Control Display. A mal-
In the following situations, the system could be
delayed or malfunction:
function has occurred in the self-leveling sus-
pension. Stop and check the vehicle. If it is con-
siderably lower at the rear than at the front, and
possibly also on one side – rear left compared to
rear right –, go to the nearest BMW center or a
System has not been initialized
>
>
>
Driving on snowy or slippery road surface
Sporty driving style: slip in the drive wheels,
high lateral acceleration
workshop that works according to BMW repair >
Driving with snow chains*
procedures with correspondingly trained per-
When you are driving with the compact wheel*
sonnel. Drive with appropriate caution in the
meantime. The vehicle has reduced ground
clearance and driving comfort may be notice-
ably reduced. Even if the position of the vehicle
is normal, go to the nearest BMW center or a
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel.
the Flat Tire Monitor is unable to function.
Initializing system
The initialization finishes during driving,
which can be interrupted at any time.
When driving resumes, the initialization is con-
tinued automatically. The system is initialized
after this activation phase. When driving with
snow chains*or a compact tire*, the system is
not initialized.<
FTM Flat Tire Monitor*
iDrive, for operating principle refer to page 16.
The concept
1.
Press the
This opens the start menu.
button.
The Flat Tire Monitor detects a pressure loss in
one tire by comparing the speeds of the individ-
ual wheels during driving.
2.
Press the controller to open the menu.
In the event of a pressure loss, there is a change
in the rolling circumference and therefore the
rotation speed of the corresponding wheel. The
system detects this change and reports it as a
flat tire.
Functional requirement
In order to ensure that a flat tire is reported cor-
rectly, the system must be initialized while the
tires have the correct inflation pressure.
3.
4.
Turn the controller until "Settings" is
selected and press the controller.
The initialization must be repeated after
each time the tire inflation pressure is cor-
rected and after every tire or wheel change.<
Select "Vehicle / Tires" and press the con-
troller.
95
Online Edition for Part no. 01 41 2 600 721 - © 08/08 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 528i, BMW 528xi, BMW 535i, BMW 535xi, BMW 550i, BMW E60, BMW E61 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4.5 out of 5)
Automotive readers have rated 2009 BMW 5-Series 528i 535i XDrive 550i E60 E61 Owners Manual 4.5 out of 5.0 based on 2 product reviews. Feeling great about my downloaded book.
I'm looking for the frozen stuff animals
Very interesting site.
A real gold mine .