Have work on the xenon lighting system
performed only by your BMW center or a
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel. Due to the high voltage present in the
system, there is a danger of fatal injuries when
work is carried out improperly.<
Parking lamps and roadside parking
lamps, daytime running lamps
H8 bulb, 35 watts
1.
Turn the bulb in the direction of the arrow, in
the opposite direction on the other side,
and remove.
Access to lamps
The illustration shows the left-hand side of the
engine compartment.
2.
Remove the connector and replace the
bulb.
Turning lamps*
H3 bulb, 55 watts
1
2
Cover cap for parking and roadside parking
lamps, daytime running lamps
1.
Remove the sealing cap, refer to Access to
lamps.
Sealing cap for turning lamps*
2.
Push the locking bar to the side out of the
anchor and fold upward.
To remove the covers:
>
Parking lamps and roadside parking lamps,
daytime running lamps: turn the cover cap
to the left and remove.
>
Turning lamps: turn the sealing cap to the
left and remove.
3.
Remove the connector and take out the
bulb.
4.
5.
6.
7.
Replace the bulb and reinstall.
Fold down the locking bar and engage it.
Reconnect the connector.
Mount the sealing cap. Watch the markings
on the bulb when doing so.
223
Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 550i, BMW E60 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)