The M Mobility System consists of
Model with pressure gauge integrated
in housing*
1
2
Sealant bottle and sticker with speed limit
Filling hose from sealant bottle to wheel
3
4
5
6
7
Connector and cable for lighter socket
Mounting for sealing bottle
Compressor
Model with pressure gauge on hose*
On/Off switch
Pressure gauge for indicating tire inflation
pressure
8
9
Button for reducing tire inflation pressure
Connecting hose for connecting compres-
sor and sealant bottle or compressor and
wheel
Connector, cable and connecting hose are
stored on underside of compressor.
3
4
5
6
7
Connector and cable for lighter socket
Mounting for sealing bottle
Compressor
Using M Mobility System
To repair a flat tire with the M Mobility System,
proceed as follows:
On/Off switch
Pressure gauge for indicating tire inflation
pressure
>
>
>
Fill sealant into wheel, refer to page 226.
Distribute sealant, refer to page 227.
8
9
Screw on pressure gauge for reducing tire
inflation pressure
Produce tire inflation pressure, refer to
page 227.
Connecting hose for connecting compres-
sor and sealant bottle or compressor and
wheel
Filling sealant into wheel
Strictly comply with the specified order,
otherwise highly pressurized sealant
could escape.<
Connector, cable and connecting hose are
stored in the compressor housing.
1.
2.
Shake sealant bottle.
Screw hose 9 onto connection of sealant
bottle.
3.
For model with pressure gauge on hose:
Make sure that screw 8 on pressure gauge
is closed.
226
Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 550i, BMW E60 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)