Driving your vehicle
Check the brake warning light by turning the ignition switch ON (do not start the engine). This light will be illuminated when the
(Continued)
The safety features of an ABS (ESC)
WARNING - ABS
equipped vehicle should not be
tested by high speed driving or cor-
nering. This could endanger the
safety of yourself or others.
ABS (ESC) will not prevent acci-
dents due to improper or danger-
ous
driving
maneuvers.
Even
though vehicle control is improved
during emergency braking, always
maintain a safe distance between
you and objects ahead. Vehicle
speeds should always be reduced
during extreme road conditions.
of the wheels. If the wheels are going to
lock, the ABS system repeatedly modu-
lates the hydraulic brake pressure to the
wheels.
When you apply your brakes under con-
ditions which may lock the wheels, you
may hear a “tik-tik’’ sound from the
brakes, or feel a corresponding sensation
in the brake pedal. This is normal and it
means your ABS is active.
In order to obtain the maximum benefit
from your ABS in an emergency situa-
tion, do not attempt to modulate your
brake pressure and do not try to pump
your brakes. Press your brake pedal as
hard as possible or as hard as the situa-
tion warrants and allow the ABS to con-
trol the force being delivered to the
brakes.
W-75
The
braking distance for cars
equipped with an anti-lock braking
system (Electronic Stability Control
System) may be longer than for
those without it in the following
road conditions.
parking brake is applied with the ignition
switch in the START or ON position.
Before driving, be sure the parking brake
is fully released and the brake warning
light is off.
If the brake warning light remains on
after the parking brake is released, there
may be a malfunction in the brake sys-
tem. Immediate attention is necessary.
If at all possible, cease driving the vehi-
cle immediately. If that is not possible,
use extreme caution while operating the
vehicle and only continue to drive the
vehicle until you can reach a safe loca-
tion or repair shop.
During these conditions the vehicle
should
speeds:
be
driven
at
reduced
•
Rough, gravel or snow-covered
roads.
•
•
With tire chains installed.
On roads where the road surface
is pitted or has different surface
height.
(Continued)
Anti-lock brake system (ABS)
The ABS continuously senses the speed
4
20
Product Specification
Categories | Hyundai Entourage Manuals, Hyundai Manuals |
---|---|
Tags | Hyundai Entourage 3.8 |
Model Year | 2009 |
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Entourage |
Document File Type | |
Copyright | Attribution Non-commercial |