Maintenance
Automatic transaxle fluid
Rear disc brake / linings, parking
brake
Steering gear box, linkage &
boots/lower arm ball joint, upper
arm ball joint
With the vehicle stopped and engine off,
check for excessive free-play in the steer-
ing wheel. Check the linkage for bends or
damage. Check the dust boots and ball
joints for deterioration, cracks, or dam-
age. Replace any damaged parts.
The fluid level should be in the “HOT”
range of the dipstick, after the engine
and transaxle are at normal operating
Check the rear disc brake and linings for
scoring, burning, leaking fluid, broken
parts, and excessive wear. Inspect the
parking brake system including the park-
ing brake pedal and cables. For detailed
service procedures, refer to the Shop
Manual.
temperature.
Check
the
automatic
transaxle fluid level with the engine run-
ning and the transaxle in neutral, with the
parking brake properly applied. Use
HYUNDAI GENUINE ATF SP-III, DIA-
MOND ATF SP-III, SK ATF SP-III or other
brands meeting the SP III specification
approved by Hyundai Motor Co. when
adding or changing fluid. Using the
wrong ATF may result in damage to the
ATM.
Brake pads, calipers and rotors
Power steering pump, belt and
hoses
Check the pads for excessive wear, discs
for run out and wear, and calipers for fluid
leakage.
Check the power steering pump and
hoses for leakage and damage. Replace
any damaged or leaking parts immediate-
ly. Inspect the power steering belt (or
drive belt) for evidence of cuts, cracks,
excessive wear, oiliness and proper ten-
sion. Replace or adjust it if necessary.
Exhaust pipe and muffler
Brake hoses and lines
Visually inspect the exhaust pipes, muf-
fler and hangers for cracks, deterioration,
or damage. Start the engine and listen
carefully for any exhaust gas leakage.
Tighten connections or replace parts as
necessary.
Visually check for proper installation,
chafing, cracks, deterioration and any
leakage. Replace any deteriorated or
damaged parts immediately.
Drive shafts and boots
Check the drive shafts, boots and clamps
for cracks, deterioration, or damage.
Replace any damaged parts and, if nec-
essary, repack the grease.
Brake fluid
Check brake fluid level in the brake fluid
reservoir. The level should be between
"MIN" and "MAX" marks on the side of
the reservoir. Use only hydraulic brake
fluid conforming to DOT 3 or DOT 4.
Suspension mounting bolts
Check the suspension connections for
looseness or damage. Retighten to the
specified torque.
Air conditioning refrigerant
Check the air conditioning lines and con-
nections for leakage and damage. Check
air conditioning performance according to
the relevant shop manual if necessary.
6
8
Product Specification
Categories | Hyundai Entourage Manuals, Hyundai Manuals |
---|---|
Tags | Hyundai Entourage 3.8 |
Model Year | 2009 |
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Entourage |
Document File Type | |
Copyright | Attribution Non-commercial |