Maintenance
AUTOMATIC TRANSAXLE
WARNING - Transaxle fluid
The transaxle fluid level should be
checked when the engine is at nor-
mal operating temperature. This
means that the engine, radiator,
radiator hose and exhaust system
etc., are very hot. Exercise great
care not to burn yourself during this
procedure.
HOT
COLD
OVQ066011N
OVQ056002
Checking the automatic transaxle
fluid level
3. Confirm that the fluid level is in “HOT”
range on the level gauge. If the fluid
level is lower, add the specified fluid
from the fill hole. If the fluid level is
higher, drain the fluid from the drain
hole.
The
automatic transaxle fluid level
should be checked regularly.
Keep the vehicle on the level ground with
the parking brake applied and check the
fluid level according to the following pro-
cedure.
4.
If the fluid level is checked in cold con-
dition (fluid temperature 68~86°F
(20~30°C))
add the fluid to “COLD”
1.
Place the selector lever in N (Neutral)
position and confirm the engine is run-
ning at normal idle speed.
line and then recheck the fluid level
according to the above step 2.
2.
After the transaxle is warmed up suffi-
ciently (fluid temperature 158~176°F
(70~80°C)),
for example by 10 minutes
usual driving, shift the selector lever
through all positions then place the
selector lever in N (Neutral) or P (Park)
position.
6
17
| Categories | Hyundai Entourage Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai Entourage 3.8 |
| Model Year | 2009 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Entourage |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)