Features of your vehicle
If the power window is not operated cor-
rectly, the automatic power window sys-
tem must be reset as follows:
✽ NOTICE
The automatic reverse feature for the
driver’s window is only active when the
“auto up” feature is used by fully
pulling up the switch. The automatic
reverse feature will not operate if the
window is raised using the halfway posi-
tion on the power window switch.
1.
Turn the ignition switch to the ON posi-
tion.
2.
Close driver’s window and continue
pulling up on driver’s power window
switch for at least 1 second after the
window is completely closed.
WARNING
Always
check for obstructions
before raising any window to avoid
injuries or vehicle damage. If an
object less than 0.16 in. (4 mm) in
diameter is caught between the
window glass and the upper win-
dow channel, the automatic reverse
window may not detect the resist-
ance and will not stop and reverse
direction.
OUN026013
Automatic reversal
If the upward movement of the window is
blocked by an object or part of the body,
the window will detect the resistance and
will stop upward movement. The window
will then lower approximately 11.8 in. (30
cm) to allow the object to be cleared.
If the window detects the resistance
while the power window switch is pulled
up continuously, the window will stop
upward movement then lower approxi-
mately 1 in. (2.5 cm). And if the power
window switch is pulled up continuously
again within 5 seconds after the window
is lowered by the automatic window
reversal feature, the automatic window
reversal will not operate.
4
27
Product Specification
Categories | Hyundai Manuals, Hyundai Veracruz Manuals |
---|---|
Model Year | 2009 |
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Veracruz |
Document File Type | |
Copyright | Attribution Non-commercial |