Features of your vehicle
Programming HomeLink
✽
®
1.
2.
Press and hold the
button for more
than 6 seconds. When the compass
memory is cleared a "C" will appear in
the display.
CAUTION
®
Before programming HomeLink to
NOTICE
• When programming a garage door
opener, it is advised to park the vehi-
cle outside of the garage.
• It is recommended that a new battery
be placed in the hand-held transmit-
ter of the device being programmed to
®
HomeLink for quicker training and
accurate transmission of the radio-
frequency signal.
a garage door opener or gate oper-
ator, make sure that people and
objects are out of the way of the
device to prevent potential harm or
To calibrate the compass, drive the
vehicle in 2 complete circles at less
than 5 mph (8 km/h).
damage. Do not use HomeLink
®
with any garage door opener that
lacks the safety stop and reverse
features required by U.S. federal
safety standards (this includes any
garage door opener model manu-
factured before April 1, 1982). A
garage door that cannot detect an
object - signaling the door to stop
and reverse - does not meet current
U.S. federal safety standards. Using
a garage door opener without these
features increases the risk of seri-
ous injury or death.
Integrated HomeLink Wireless Control
®
System
The
HomeLink®
Wireless
Control
•
•
Some vehicles may require the igni-
tion switch to be turned to the second
(or "accessories") position for pro-
System provides a convenient way to
replace up to three hand-held radio-fre-
quency (RF) transmitters with a single
built-in device.This innovative feature will
learn the radio frequency codes of most
current transmitters to operate devices
such as gate operators, garage door
openers, entry door locks, security sys-
tems, even home lighting. Both standard
and rolling code-equipped transmitters
can be programmed by following the out-
gramming
HomeLink.
and/or
operation
of
In the event that there are still pro-
gramming difficulties or questions
after following the programming steps
®
listed below, contact HomeLink at:
or
www.homelink.com
3515.
1-800-355-
Retain the original transmitter of the RF
device you are programming for use in
other vehicles as well as for future
lined procedures. Additional HomeLink
information can be found at: www.home-
link.com or by calling 1-800-355-3515.
®
HomeLink
®
programming.
It is also sug-
gested that upon the sale of the vehicle,
the programmed HomeLink buttons be
erased for security purposes.
®
4
45
| Categories | Hyundai Manuals, Hyundai Veracruz Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Veracruz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)