Safety features of your vehicle
(Continued)
•
•
When resetting the rear seatback
to the upright position, make
sure it is securely latched by
pushing it forward and back-
wards.
To avoid the possibility of burns,
do not remove the carpet in the
cargo area. Emission controls
beneath this floor generate high
exhaust temperatures.
OUN028033
OUN028035
Front seat adjustment - manual
C010102AUN
Seatback angle
To recline the seatback:
WARNING
C010101AUN
After adjusting the seat, always
check that it is securely locked into
place by attempting to move the
seat forward or reverse without
using the lock release lever.
Sudden or unexpected movement
of the driver's seat could cause you
to lose control of the vehicle result-
ing in an accident.
Forward and backward
To move the seat forward or backward:
1.
Lean forward slightly and lift up on the
seatback recline lever located on the
outside of the seat at the rear.
1.
Pull the seat slide adjustment lever
under the front edge of the seat cush-
ion up and hold it.
2. Carefully lean back on the seat and
adjust the seatback of the seat to the
position you desire.
3. Release the lever and make sure the
seatback is locked in place. (The lever
MUST return to its original position for
the seatback to lock.)
2.
3.
Slide the seat to the position you
desire.
Release the lever and make sure the
seat is locked in place.
Adjust the seat before driving, and make
sure the seat is locked securely by trying
to move forward and backward without
using the lever. If the seat moves, it is not
locked properly.
3
4
| Categories | Kia Manuals, Kia Rondo Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)