Maintenance
G051100AUN
G051500AUN
G051900AUN
Cooling system
Brake hoses and lines
Brake discs, pads, calipers and
rotors
Check the pads for excessive wear, discs
for run out and wear, and calipers for fluid
leakage.
Check cooling system components, such
as radiator, coolant reservoir, hoses and
connections for leakage and damage.
Replace any damaged parts.
Visually check for proper installation,
chafing, cracks, deterioration and any
leakage. Replace any deteriorated or
damaged parts immediately.
G051200AUN
G051600AUN
G052000AUN
Coolant
Brake fluid
Exhaust pipe and muffler
The coolant should be changed at the
intervals specified in the maintenance
schedule.
Check brake fluid level in the brake fluid
reservoir. The level should be between
“MIN” and “MAX” marks on the side of
the reservoir. Use only hydraulic brake
fluid conforming to DOT 3 or DOT 4
specification.
Visually inspect the exhaust pipes, muf-
fler and hangers for cracks, deterioration,
or damage. Start the engine and listen
carefully for any exhaust gas leakage.
Tighten connections or replace parts as
necessary.
G051400AUN
Automatic transaxle fluid
The fluid level should be in the "HOT"
range of the dipstick, after the engine
and transaxle are at normal operating
G051700AUN
Parking brake
G052100AUN
Suspension mounting bolts
temperature.
Check
the
automatic
Inspect the parking brake system includ-
ing the parking brake pedal and cables.
Check the suspension connections for
looseness or damage. Retighten to the
specified torque.
transaxle fluid level with the engine run-
ning and the transaxle in neutral, with the
parking brake properly applied.
G051800APA
Rear brake drums and linings
(if equipped)
Check the rear brake drums and linings
for scoring, burning, leaking fluid, broken
parts, and excessive wear.
7
14
| Categories | Kia Manuals, Kia Rondo Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)