What to do in an emergency
ROAD WARNING
IN CASE OF AN EMERGENCY
WHILE DRIVING
It should be used whenever emergency
repairs are being made or when the vehi-
cle is stopped near the edge of a road-
way.
F020100AUN-EU
If the engine stalls at a crossroad
or crossing
Depress the flasher switch with the igni-
tion switch in any position. The flasher
switch is located in the center console
switch panel. All turn signal lights will
flash simultaneously.
If the engine stalls at a crossroad or
crossing, set the shift lever in the N
(Neutral) position and then push the vehi-
cle to a safe place.
F020200AUN-EU
•
•
•
The hazard warning flasher operates If you have a flat tire while driving
whether your vehicle is running or not.
If a tire goes flat while you are driving:
OUN027218N
The turn signals do not work when the
hazard flasher is on.
1.
Take your foot off the accelerator pedal
and let the car slow down while driving
straight ahead. Do not apply the brakes
immediately or attempt to pull off the
road as this may cause a loss of con-
trol. When the car has slowed to such
a speed that it is safe to do so, brake
carefully and pull off the road. Drive off
the road as far as possible and park on
firm, level ground. If you are on a divid-
ed highway, do not park in the median
area between the two traffic lanes.
F010100AUN
Hazard warning flasher
Care must be taken when using the
hazard warning flasher while the vehi-
cle is being towed.
The hazard warning flasher serves as a
warning to other drivers to exercise
extreme caution when approaching,
overtaking, or passing your vehicle.
2.
3.
When the car is stopped, turn on your
emergency hazard flashers, set the
parking brake and put the transaxle in
P.
Have all passengers get out of the car.
Be sure they all get out on the side of
the car that is away from traffic.
6
2
| Categories | Kia Manuals, Kia Rondo Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)