▷
▷
If the vehicle stops in front of an object that
is detected by only one of the corner sen‐
sors.
1.
2.
"Switch on rear view camera" Select the
symbol.
Press the controller.
If moving parallel to a wall.
The backup camera image is displayed. The set‐
ting is stored for the remote control currently in
use.
The signal tone is switched off:
▷
When the vehicle moves away from an ob‐
ject by more than approx. 4 in/10 cm.
Malfunction
▷
When transmission position P is engaged.
Volume
You can set the volume of the PDC signal tone,
refer to page 173.
The setting is stored for the remote control cur‐
rently in use.
Visual warning
The approach of the vehicle to an object can be
shown on the Control Display. Objects that are
farther away are displayed on the Control Dis‐
play before a signal tone sounds.
A Check Control message, refer to page 82, is
displayed in the instrument cluster.
On the Control Display, the areas in front of and
behind the vehicle are shaded. PDC has failed.
Have the system checked.
To ensure full operability:
▷
▷
Keep the sensors clean and free of ice.
When using high-pressure washers, do not
spray the sensors for long periods and main‐
tain a distance of at least 12 in/30 cm.
Backup camera*
The display appears as soon as PDC is acti‐
vated.
The concept
If the backup camera image was selected last, it
again appears on the display. To switch to PDC:
Thebackupcameraprovidesassistanceinpark‐
ing and maneuvering backwards. The area be‐
hind the vehicle is shown on the Control Display.
1.
"Switch off rear view camera" Select the
symbol on the Control Display.
2.
Press the controller.
System limits
The setting is stored for the remote control cur‐
rently in use.
Check the traffic situation as well
Check the traffic situation around the ve‐
hiclewithyourowneyes. Otherwise, anaccident
could result from road users or objects located
outside the picture area of the backup cam‐
era.◀
Display on the Control Display
Switching on the backup camera via the
iDrive
Detection of objects
With PDC activated:
116
Online Edition for Part no. 0141 2602614 - © 08 09 510 BMW AG
Product Specification
Categories | BMW 5-Series Manuals, BMW Manuals |
---|---|
Tags | BMW 550i, BMW F07, BMW Gran Turismo |
Model Year | 2010 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |