Requesting a stored setting
tection, they are not a substitute for safety
belts.
Do not request a position from the mem-
ory while the vehicle is moving; otherwise,
there is a risk of accident from unexpected seat
movement.<
Convenience mode
1.
Open the driver's door after unlocking or
turn the ignition key to position 1.
2.
Briefly press the desired memory button 1,
2
or 3.
The adjustment procedure is canceled when
you press one of the seat adjustment buttons or
use one of the memory buttons.
Fastening
Make sure you hear the latch plate engage in
the belt buckle.
Safety feature
Safety belt reminder for front seats
1.
Close the driver's door and turn the ignition
key to position 0 or 2.
The indicator lamp flashes or lights up.
In addition, a signal sounds. Please
make sure that the safety belts are
being worn correctly.
2.
Press the desired memory button 1, 2 or 3
and maintain pressure until the adjustment
process has been completed.
The safety belt reminder is activated if the
safety belt on the driver's side has not yet been
fastened.
At speeds greater than 5 mph/8 km/h, the
safety belt reminder is also activated if the pas-
senger side safety belt has not yet been fas-
tened, if objects are placed on the passenger's
seat, or if the driver or front passenger's safety
belt is released.
If the
ently:
button has been pressed inadvert-
Press the button again, the LED goes out.
You can have your vehicle programmed
to automatically recall your own individual
stored adjustment settings for the seat and
exterior mirror position whenever you use your
personal remote control to unlock the vehicle.<
If you make use of this setting, be sure
that the footwell behind the driver's seat
is unobstructed before unlocking the vehicle.
If you fail to do so, any persons, animals or
objects behind the seat could be injured or
damaged by a rearward movement of the
seat.<
Releasing
1.
2.
3.
Hold the belt firmly.
Press the red button in the buckle.
Guide the belt back into its reel.
The upper shoulder strap's anchorage point will
be in the correct position for seat occupants of
every build if the seat is correctly adjusted, refer
to page 27.
Safety belts
In the rear, the middle belt buckle embossed
with the word CENTER is intended exclusively
for use by passengers riding in the center posi-
tion.
To ensure that the safety systems con-
tinue to provide optimum protection,
please follow the instructions on page 27.<
Make sure the safety belts are worn in all occu-
pied seats every time you drive. Although air-
bags enhance safety by providing added pro-
32
Online Edition for Part no. 01 41 2 602 348 - © 02/09 BMW AG
| Categories | BMW Manuals, BMW X3 Manuals |
|---|---|
| Tags | BMW E83, BMW F25, BMW X3 xDrive28i, BMW X3 xDrive30i |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 2 out of 2)
Automotive readers have rated 2010 BMW X3 xDrive28i X3 xDrive30i E83 F25 Owners Manual 2.0 out of 2.0 based on 1 product reviews. I need the manual for BMW 2009.