Do not run the combustion engine in
enclosed spaces; otherwise, the inhala-
tion of toxic exhaust gases can cause loss of
consciousness and death. The exhaust gases
contain carbon monoxide, an odorless and col-
orless, but highly toxic gas.
Never leave the vehicle unattended with the
combustion engine running; such a vehicle rep-
resents a potential safety hazard.<
>
if you remove the remote control from the
ignition lock
Starting to drive
1.
2.
3.
4.
Activate drive readiness.
Select transmission position D, M/S, or R.
Release the parking brake.
Start to drive.
Deactivating drive readiness
When drive readiness is switched off, the
tachometer pointer is in the OFF position.
Driving
When leaving the vehicle, always take
along the remote control.
Electric driving: eDRIVE
Set the parking brake firmly when parking; oth-
erwise, the vehicle could roll.<
Requirements
After the vehicle is switched off, audible operat-
ing sounds may issue from the hybrid system,
e.g. the cooling of the high-voltage battery.
Electric driving is possible under the following
conditions:
>
>
>
driving speed:
a maximum of approx. 37 mph/60 km/h
Procedure
charge state display of the high-voltage
battery: at least 15%
1.
Select transmission position P with the
vehicle stationary.
transmission in position D or R, refer to
page 17
2.
3.
4.
Press the Start/Stop button.
Set the parking brake.
>
>
>
drive system at operating temperature
accelerator pedal not pressed down too far
driver's door closed
Remove the remote control from the igni-
tion lock.
Before removing the remote control, first
press it in as far as possible to release the
locking device.
Possible driving speed
The possible speed that can be reached in elec-
tric driving depends on the charge state of the
high-voltage battery.
Before driving into a car wash
The vehicle can roll if you proceed according to
the following steps:
>
charge state display 15% to 40%:
maximum driving speed is approx. 25 mph/
1.
With comfort access*: insert the remote
control into the ignition lock.
40
km/h
>
charge state display 40% to 100%:
maximum driving speed is approx. 40 mph/
2.
3.
4.
Depress brake pedal.
Select transmission position N.
65
km/h
Release the parking brake or deactivate
Automatic Hold.
When accelerating past a speed of 25 mph/
40
km/h, the combustion engine is started
5.
Press the Start/Stop button to deactivate
drive readiness.
briefly in order to assure smooth acceleration.
Indicators of electric driving in the instrument
panel, refer to page 22.
Transmission position P will be selected:
automatically after approx. 30 minutes
>
15
Online Edition for Part no. 01 41 2 603 632 - © 09/09 BMW AG
| Categories | BMW Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E72, Hybrid |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 1 out of 1)
Automotive readers have rated 2010 BMW X6 Active Hybrid Owners Manual 1.0 out of 1.0 based on 1 product reviews. The beast information.
Comments are closed.