Things to remember when driving
Break-in period
Removing unnecessary cargo
Additional weight increases fuel consumption.
Moving parts need breaking-in time to adjust to
each other. To ensure that your vehicle contin-
ues to provide optimized economy of operation
throughout an extended service life, we request
that you devote careful attention to the follow-
ing section.
Removing add-on parts after use
Remove unneeded auxiliary mirrors, roof or rear
luggage racks after use. Add-on parts attached
to the vehicle impede the aerodynamics and
increase the fuel consumption.
Engine and rear axle differential
Closing windows and glass sunroof*
Always obey all official speed limits.
An open glass sunroof or window likewise
increases air resistance and thus fuel consump-
tion.
Up to 1,200 miles/2,000 km
Drive at various engine and vehicle speeds, but
do not exceed:
Checking tire inflation pressures
regularly
>
4,500 rpm or 100 mph/160 km/h
Avoid full-throttle operation and use of the
transmission's kick-down mode during these
initial miles.
Check and correct the tire inflation pressure as
needed at least twice a month and before long
trips.
An insufficient tire inflation pressure increases
the rolling resistance and thus increases the
fuel consumption and tire wear.
From 1,200 miles/2,000 km
The engine and vehicle speed can gradually be
increased.
Driving off immediately
Brake system
Do not allow the engine to warm up by leaving it
running while the vehicle remains stationary.
Instead, begin to drive at a moderate engine
speed. This is the fastest way for the cold
engine to reach its operating temperature.
Brakes require an initial break-in period of
approx. 300 miles/500 km to achieve optimized
contact and wear patterns between brake pads
and rotors. Drive in a reserved manner during
this break-in period.
Thinking ahead when driving
Following part replacement
Avoid unnecessary acceleration and braking.
To do so, maintain the appropriate distance
from the vehicle in front of you. An anticipatory
and smooth driving style reduces fuel con-
sumption.
Observe the break-in instructions again if com-
ponents mentioned above must be replaced
after subsequent driving operation.
Saving fuel
Avoiding high engine speeds
Driving at a low engine speed reduces fuel con-
sumption and minimizes wear.
The fuel consumption of your vehicle depends
on various factors. Through a few simple steps,
your driving style, and regular maintenance, you
can have a positive influence on your fuel con-
sumption and environmental impact.
26
Online Edition for Part no. 01 41 2 603 632 - © 09/09 BMW AG
| Categories | BMW Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E72, Hybrid |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 1 out of 1)
Automotive readers have rated 2010 BMW X6 Active Hybrid Owners Manual 1.0 out of 1.0 based on 1 product reviews. The beast information.
Comments are closed.