The transmission position and the currently
engaged gear are displayed.
When the vehicle is stationary and the
transmission is in the R, D, or M/S posi-
tion, if you disconnect the driver's seat safety
belt and open the driver's door without stepping
on any of the pedals, then the transmission
shifts into position P.<
Selecting transmission position
>
You can select transmission positions D, R
or N only when drive readiness is activated.
>
With the vehicle stationary, depress the
brake pedal before shifting out of P or N;
otherwise the shift command will not be
executed: shiftlock.
R Reverse
Select only with the vehicle stationary.
An interlock prevents inadvertent gearshifts
into transmission position R. To release the
lock, push the unlock button 1.
Hold the brake pedal down until start-
ing to drive; otherwise, the vehicle can
begin to move.<
During electric driving, please note that
pedestrians and other road users may fail
to notice the vehicle in the usual way due to the
lack of engine noise. For example, proceed with
particular caution when pulling into and out of a
parking space.<
Shifting into D, R, N
P Park
Select only with the vehicle stationary. The rear
wheels are locked.
The transmission automatically shifts into
P as soon as you switch off the engine.
Unless position N is selected and the remote
control is in the ignition lock.<
Briefly press the selector lever in the desired
direction, beyond a resistance point if neces-
sary. When shifting out of P or into R, simulta-
neously push the unlock button 1.
N Neutral
Can be selected in automatic car washes, for
example. The vehicle can roll.
The engaged transmission position is displayed
on the selector lever.
The transmission remains in N even after
the engine is switched off whenever you
leave the remote control in the ignition lock.
This function is used, for example, in a car wash,
refer to page 15. After approx. 30 minutes P is
automatically engaged.<
The selector lever immediately returns to the
center position when released.
Shifting into P
Shifting into N
It is possible to select N even when the ignition
is switched on.
It is thus possible to move the vehicle, e.g. in the
event of a malfunction, even if it is not possible
to activate drive readiness.
Press button P.
17
Online Edition for Part no. 01 41 2 603 632 - © 09/09 BMW AG
| Categories | BMW Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E72, Hybrid |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 1 out of 1)
Automotive readers have rated 2010 BMW X6 Active Hybrid Owners Manual 1.0 out of 1.0 based on 1 product reviews. The beast information.
Comments are closed.