2010 Hyundai Genesis Owners Manual

Features of your vehicle
Programming HomeLink
®
1.
2.
Press and hold the
button for more
than 6  seconds.   When the  compass
memory is cleared a "C" will appear in
the display.
CAUTION
®
Before programming  HomeLink   to
NOTICE
•  When  programming   a  garage  door
opener, it is advised to park the vehi-
cle outside of the garage.
•  It is recommended that a new battery
be placed in the hand-held transmit-
ter of the device being programmed to
a garage door opener  or gate oper-
ator,  make   sure  that  people   and
objects  are  out of  the  way  of  the
device to prevent  potential harm or
To  calibrate  the  compass,  drive   the
vehicle  in  2 complete  circles  at  less
than 5 mph (8 km/h).
damage.   Do  not   use   HomeLink
®
with  any  garage door  opener  that
lacks  the  safety  stop  and reverse
features  required   by  U.S.   federal
safety standards  (this includes any
garage  door  opener  model  manu-
factured  before   April  1,  1982).   A
garage door  that  cannot detect  an
object -  signaling the  door to  stop
and reverse - does not meet current
U.S. federal safety standards. Using
a garage door opener without these
features increases  the risk  of seri-
ous injury or death.
HomeLink   for  quicker training  and
®
accurate  transmission   of  the  radio-
frequency signal.
Some  vehicles  may  require  the  igni-
tion switch to be turned to the second
(or  "accessories")   position  for  pro-
Integrated HomeLink   Wireless Control
®
System
The
HomeLink®
Wireless
Control
System  provides  a  convenient   way  to
replace up  to three  hand-held radio-fre-
quency  (RF)  transmitters  with  a  single
built-in device.This innovative feature will
learn the  radio frequency codes of  most
current  transmitters  to  operate  devices
such  as   gate  operators,   garage  door
openers, entry  door  locks, security  sys-
tems, even home  lighting. Both standard
and  rolling  code-equipped   transmitters
can be programmed by following the out-
gramming
HomeLink.
and/or
operation     of
In  the  event  that  there  are  still  pro-
gramming   difficulties   or   questions
after following the programming steps
listed  below,  contact  HomeLink   at:
®
1-800-355-
www.homelink.com     or
3515.
Retain the  original transmitter of  the RF
device  you are  programming  for use  in
other   vehicles   as  well   as   for  future
lined  procedures. Additional  HomeLink
information can be found  at: www.home-
link.com or by calling 1-800-355-3515.
®
HomeLink
®
programming.
It is also sug-
gested that upon  the sale of the vehicle,
the  programmed HomeLink   buttons  be
erased for security purposes.
®
4
42
Product Specification
Categories Hyundai Manuals, Hyundai Genesis, Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 399 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Genesis
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field