2010 Hyundai Genesis Owners Manual

What to do in an emergency
13.
Reinstall the wheel  cap by fitting
the boss of  the wheel cap  in the
groove  of the  wheel,  hitting  the
center of the wheel cap with your
hand (If equipped).
CAUTION
Your vehicle has  metric threads
on  the  wheel  studs  and  nuts.
Make
certain
during
wheel
removal that the same  nuts that
were  removed are  reinstalled  -
or,  if  replaced,  that   nuts  with
metric  threads   and  the   same
chamfer configuration are used.
Installation    of    a   non-metric
thread  nut on  a  metric stud  or
vice-versa  will  not   secure  the
wheel  to the  hub  properly  and
will damage  the  stud so  that it
must be replaced.
Note that  most lug  nuts do  not
have metric threads.  Be sure to
use  extreme  care   in  checking
for thread style before installing
aftermarket lug  nuts or  wheels.
If  in  doubt, consult  an  author-
ized HYUNDAI dealer.
If you have a  tire gauge, remove the
valve cap and check the air pressure.
If the  pressure is lower  than recom-
mended, drive  slowly to the  nearest
service station and inflate to the  cor-
rect pressure. If  it is too high,  adjust
it  until it  is  correct. Always  reinstall
the   valve   cap  after   checking    or
adjusting tire  pressure. If  the cap  is
not replaced,  air  may leak  from the
tire.  If  you  lose   a  valve  cap,  buy
another and install it as soon as pos-
sible.
OBH068013
Then position  the wrench  as shown
in the drawing and  tighten the wheel
nuts.  Be sure  the  socket  is  seated
completely over the nut. Do not stand
on  the   wrench  handle  or   use  an
extension pipe over the wrench  han-
dle. Go around  the wheel  tightening
every other nut until they are all tight.
Then   double-check   each   nut   for
tightness.   After  changing   wheels,
have an authorized HYUNDAI dealer
tighten the wheel nuts to their proper
torque as soon as possible.
After   you  have   changed   wheels,
always secure the flat tire in its place
and return the jack  and tools to their
proper storage locations.
Wheel nut tightening torque:
Steel wheel & aluminum alloy wheel:
65~79
lb·ft (9~11 kg·m)
6
17
Product Specification
Categories Hyundai Manuals, Hyundai Genesis, Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 399 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Genesis
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field