Driving your vehicle
The EPB malfunction indicator may illu-
minate when the ESC indicator comes
on to indicate that the ESC is not working
properly, but it does not indicate a mal-
function of the EPB.
E070704BBH
Emergency braking
If there is a problem with the foot brake
while driving, emergency braking is pos-
sible by pressing and holding the EPB
switch. Braking is possible only while you
are holding the EPB switch.
OBH058057
OBH058058
E070703ABH
E070706BBH
EPB malfunction indicator
(if equipped)
The EPB malfunction indicator will illumi-
nate when the ignition switch is turned
ON, but should go off after approximate-
ly 3 seconds, if the system is operating
normally.
If the EPB malfunction indicator remains
on, comes on while driving, or does not
come on when the ignition switch is
turned to the ON position, this indicates
that the EPB may have malfunctioned.
Take your vehicle to an authorized
HYUNDAI dealer and have the system
checked.
EPB emergency release
If the EPB does not release properly, do
as follows:
WARNING
Do not operate the parking brake
while the vehicle is moving except
in an emergency situation.
1.
2.
3.
Shift the shift lever into P (Park).
Block the wheels.
Open the trunk and remove the cover.
✽
NOTICE
4. Remove the emergency release han-
dle from the tool case.
During emergency braking by the EPB,
the parking brake warning light will
blink to indicate that the system is oper-
ating.
5.
Remove the emergency release cable
cover.
6. Install the emergency release handle
into the threaded end of the emer-
gency release cable by turning it clock-
wise.
7.
Pull up the handle until sounds a
"took".
The EPB warning light blinks.
5
23
| Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Genesis |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)