2010 Hyundai I20 Owners Manual

Features of your vehicle
D230503APB
V NOTICE
•  During  air conditioning  system opera-
tion,  you  may  occasionally   notice  a
slight change  in engine  speed  as the
air   conditioning  compressor   cycles.
This  is   a  normal   system   operation
characteristic.
Air conditioning (if equipped)
While using  the air  conditioning sys-
tem,  monitor the  temperature  gauge
closely  while  driving   up  hills  or  in
heavy  traffic  when outside  tempera-
tures are  high. Air  conditioning   sys-
tem operation may cause engine over-
heating.  Continue  to  use the  blower
fan but  turn the air  conditioning sys-
tem off if the temperature gauge  indi-
cates engine overheating.
All  HYUNDAI Air  Conditioning Systems
are  filled   with  environmentally  friendly
R-134a refrigerant  which does not dam-
age the ozone layer.
1.
Start  the engine.  Push the  air  condi-
tioning button.
•  Use the  air conditioning system  every
month only for a few minutes to ensure
maximum system performance.
2.
3.
Set the mode to the
position.
•  When  using  the air  conditioning  sys-
tem, you  may notice  clear water drip-
ping (or even  puddling) on the ground
under the  passenger side of  the vehi-
cle. This is a  normal system operation
characteristic.
Set the  air intake  control to the  recir-
culated   air  position.   However,  pro-
longed operation of the recirculated air
position will excessively  dry the air. In
this case, change the air position.
While opening the  windows in humid
weather  air conditioning  may  create
water   droplets   inside   the   vehicle.
Since  excessive   water  droplets  may
cause damage to electrical equipment,
air conditioning  should  only be  used
with the windows closed.
4.
Adjust the fan speed  control and tem-
perature control to maintain maximum
comfort.
•  Operating  the air  conditioning system
in the recirculated air position provides
maximum cooling,  however,  continual
operation in this  mode may cause  the
air inside the vehicle to become stale.
When maximum cooling is desired, set
the temperature control to the extreme
left,  set  the  air  intake  control  to  the
recirculated  air position,  then  set  the
fan speed control to the highest speed.
Air conditioning system operation tips
During   cooling  operation,   you   may
occasionally  notice   a  misty  air  flow
because of rapid cooling and humid air
intake. This is a normal  system opera-
tion characteristics.
•  If the vehicle has been parked in direct
sunlight during  hot weather,  open the
windows for a  short time to let  the hot
air inside the vehicle escape.
To help  reduce moisture  inside of  the
windows   on   rainy  or   humid   days,
decrease the humidity  inside the vehi-
cle  by  operating  the  air  conditioning
system.
4
70
Product Specification
Categories Hyundai Manuals, Hyundai i20 Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 737 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, i20
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field