2010 Hyundai I20 Owners Manual

Maintenance
G201005AUN
G201007AEN
WARNING - Tire age
5. Maximum permissible inflation
pressure
This number  is the greatest  amount     applicable    on    the   tire    sidewall
7. Uniform tire quality grading
Quality grades  can  be found  where
Tires  degrade  over  time,  even
when they  are  not being  used.
Regardless   of   the  remaining
tread, we  recommend that tires
generally  be replaced  after  six
of air pressure  that should be  put in     between  tread  shoulder  and  maxi-
mum section width.
permissible inflation pressure.  Refer     For example:
the tire. Do not exceed the maximum
to the  Tire and  Loading  Information
label   for    recommended    inflation
pressure.
(
6)   years  of   normal   service.
TREADWEAR 200
TRACTION AA
Heat caused by  not climates or
frequent   high   loading   condi-
tions  can accelerate  the  aging
process.  Failure  to  follow  this
Warning  can  result  in  sudden
tire failure,  which could lead  to
a  loss  of control  and  an  acci-
dent involving serious  injury or
death.
TEMPERATURE A
G201006AUN
Tread wear
6.
Maximum load rating
The tread wear  grade is a compara-
tive rating based on  the wear rate of
the tire when tested under controlled
conditions  on   a  specified   govern-
ment test course. For example, a tire
graded  150 would  wear one-and-a-
half times  (1½) as  well  on the  gov-
ernment course as a tire graded 100.
This number indicates the  maximum
load  in  kilograms  and  pounds  that
can  be  carried   by  the  tire.  When
replacing  the  tires  on   the  vehicle,
always use a  tire that has  the same
load  rating  as  the  factory  installed
tire.
G201004AEN
4.
Tire ply composition and material
The number of layers or plies of rub-
ber-coated fabric are  in the tire. Tire
manufacturers also must indicate the
materials  in  the  tire, which  include
steel,  nylon,  polyester,  and  others.
The letter  "R" means radial  ply con-
struction; the letter "D" means diago-
nal or  bias ply construction; and  the
letter "B" means belted-bias ply con-
struction.
The  relative   performance   of  tires
depends upon  the actual  conditions
of   their  use,   however,   and   may
depart  significantly   from  the  norm
due  to  variations  in  driving  habits,
service practices  and  differences in
road characteristics and climate.
7
57
Product Specification
Categories Hyundai Manuals, Hyundai i20 Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 737 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, i20
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field