Maintenance
G200400APB
With a full-size spare tire (if equipped)
Disc brake pads should be inspected
for wear whenever tires are rotated.
Tire rotation
To equalize tread wear, it is recom-
mended that the tires be rotated
every 12,000 km (7,500 miles) or
sooner if irregular wear develops.
✽
NOTICE
Rotate radial tires that have an
asymmetric tread pattern only from
front to rear and not from right to
left.
During rotation, check the tires for
correct balance.
When
rotating
tires,
check
for
S2BLA790
S2BLA790A
CBGQ0707A
uneven wear and damage. Abnormal
wear is usually caused by incorrect
tire pressure, improper wheel align-
ment, out-of-balance wheels, severe
braking or severe cornering. Look for
bumps or bulges in the tread or side
of tire. Replace the tire if you find
either of these conditions. Replace
the tire if fabric or cord is visible.
After rotation, be sure to bring the
front and rear tire pressures to spec-
ification and check lug nut tightness.
Without a spare tire
WARNING
Do not use the compact spare
tire for tire rotation.
•
•
Do not mix bias ply and radial
ply tires under any circum-
stances.
This
may
cause
unusual handling characteris-
tics that could result in death,
severe injury, or property
damage.
Directional tires (if equipped)
Refer to “Tire and wheels” in section
8.
7
52
Product Specification
Categories | Hyundai Manuals, Hyundai i20 Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, i20 |
Document File Type | |
Copyright | Attribution Non-commercial |