FDE 7 (IMPORTANT DATA).QXP 7/7/2009 2:49 PM Page 35
Maintenance
AUTOMATIC TRANSAXLE FLUID (IF EQUIPPED)
2.
After the transaxle is warmed up suffi-
ciently (fluid temperature 70~80°C
for example by 10 min-
(158~176°F),
utes usual driving, move the shift lever
through all positions then place the
selector lever in “N (Neutral) or P
(Park)” position.
OFD079012E
OFD079045E
G100100AFD
3. Confirm that the fluid level is in “HOT”
range on the level gauge. If the fluid
level is lower, add the specified fluid
from the fill hole. If the fluid level is
higher, drain the fluid from the drain
hole.
Checking the automatic transaxle
fluid level
The automatic transaxle fluid level
should be checked regularly.
Keep the vehicle on the level ground with
the parking brake applied and check the
fluid level according to the following pro-
cedure.
4.
If the fluid level is checked in cold con-
dition (fluid temperature 20~30°C
(68~86°F) add the fluid to “C” (COLD)
line and then recheck the fluid level
according to the above step 2.
1.
Place the selector lever in N (Neutral)
position and confirm the engine is run-
ning at normal idle speed.
7
35
| Categories | Hyundai Manuals, Hyundai i30 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i30 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)