FDE 7 (IMPORTANT DATA).QXP 7/7/2009 2:52 PM Page 53
Maintenance
G200500AUN
Wheel alignment and tire balance
Tread wear indicator
WARNING - Replacing
tires
The wheels on your vehicle were
aligned and balanced carefully at the
factory to give you the longest tire life
and best overall performance.
• Driving on worn-out tires is
and
very
hazardous
will
reduce braking effectiveness,
steering accuracy, and trac-
tion.
In most cases, you will not need to
have your wheels aligned again.
However, if you notice unusual tire
wear or your vehicle pulling one way
or the other, the alignment may need
to be reset.
• Your vehicle is equipped with
tires designed to provide for
safe ride and handling capa-
bility. Do not use a size and
type of tire and wheel that is
different from the one that is
originally installed on your
vehicle. It can affect the safety
and performance of your vehi-
cle, which could lead to han-
dling failure or rollover and
serious injury.When replacing
the tires, be sure to equip all
four tires with the tire and
wheel of the same size, type,
tread, brand and load-carrying
capacity.
1LDA5026
G200600BFD
If you notice your vehicle vibrating
when driving on a smooth road, your
wheels may need to be rebalanced.
Tire replacement
If the tire is worn evenly, a tread wear
indicator will appear as a solid band
across the tread. This shows there is
less than 1.6 mm (1/16 inch) of tread
left on the tire. Replace the tire when
this happens.
CAUTION
Improper wheel weights can
damage your vehicle's alu-
minum
wheels.
Use
approved wheel weights.
only
Do not wait for the band to appear
across the entire tread before replac-
ing the tire.
(Continued)
7
53
| Categories | Hyundai Manuals, Hyundai i30 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i30 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)