Safety features of your vehicle
WARNING
WARNING - Tether strap
When using the vehicle's "Tether
Anchor" system to install a child
restraint system in the rear seat, all
unused vehicle rear seat belt metal
latch plates or tabs must be latched
securely in their seat belt buckles
and the seat belt webbing must be
retracted behind the child restraint
to prevent the child from reaching
and taking hold of unretracted seat
belts. Unlatched metal latch plates
or tabs may allow the child to reach
the unretracted seat belts which
may result in strangulation and a
serious injury or death to the child
in the child restraint.
• A child can be seriously injured
or killed in a collision if the child
restraint
is
not
properly
anchored. Always follow the child
seat manufacturer’s instructions
for installation and use.
• Never mount more than one child
restraint to a single tether or to a
single lower anchorage point.The
increased load caused by multi-
ple seats may cause the tethers
or anchorage points to break,
causing serious injury or death.
2GHA3300L
1.
2.
Route the child restraint seat strap
over the seatback.
For vehicles with adjustable head-
rests, route the tether strap under the
headrest and between the headrest
posts, otherwise route the tether strap
over the top of the seatback.
Connect the tether strap hook to the
appropriate child restraint hook holder
and tighten to secure the child restraint
seat.
WARNING - Child restraint
check
Check that the child restraint sys-
tem is secure by pushing and
pulling it in different directions.
Incorrectly fitted child restraints
may swing, twist, tip or separate
causing death or serious injury.
3
31
| Categories | Kia Magentis Manuals, Kia Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)