2010 Kia Magentis Owners Manual

Features of your vehicle
D010301AMG-EC
3.You  may set the  remaining number  of
digits by following steps 1 and 2.
CAUTION
"Limp Home" Mode and Related
Procedures
4.If  all of  the four  password digits  have
been  successfully   entered,  turn   the
ignition  key "ON"  and  check  that the
immobilizer indicator illuminates.  From
this time, you have to start your engine
within  30 seconds.  If  you try  to  start
your  engine  after   30  seconds,  your
engine will not start.
•  If  the password is  entered incor-
rectly  three   consecutive   times,
wait  for  about  one  hour to  per-
form  the   limp   home  activation
procedure again.
•  If  you  cannot  start  your  engine
using  the  limp   home  activation
procedure,    have   your   vehicle
If the immobilizer warning indicator blinks
for five seconds  when the ignition  key is
turned to the "ON" position, this indicates
the immobilizer system  requires service.
The  engine  cannot  be  started   without
using the procedure below.
The  following procedure  describes  how
to start  the engine  using the limp  home
towed by an  authorized KIA deal-
er.
function  (0, 1,  2,  3  as a  sample  pass-      NOTICE
word).
If the engine stalls while driving in the
"limp home" mode, you can start your
engine   within  3   seconds  without   re-
entering the password.
NOTICE
You can get a limp home password when
the  vehicle  is  first  delivered  to  you.  If
you  do  not  have   a  password,  consult
your authorized KIA dealer.
If the immobilizer  indicator blinks for five
seconds, you must re-enter the password
(steps 1~4).
1.
To activate the password, turn the igni-
tion key  "ON" and "OFF"  according to
the digit numbers.The immobilizer indi-
cator will blink along with the operation
of  the ignition  key.  For example,  turn
the ignition  key once  for digit  number
After performing the limp home activation
procedure, consult  with  your authorized
KIA dealer as soon as possible.
"1",
and twice  for  "2", and  so on. For
the  digit number  "0",  you  must cycle
the ignition key 10 times.
2.
6
Wait for 3~10 seconds.
4
Product Specification
CategoriesKia Magentis Manuals, Kia Manuals
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 336 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field